1 st i lager st i lager
Tillgänglig efter datum:
The Scorpion HKIII-5035-410 motor will provide all the power you need for the larger 800 class electric helicopters, those massive electric powered scale projects or for your workhorse camera platform helicopters that need to be able to lift heavy weights reliably.
Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with high quality laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.
Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.
For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!
|Stator Diameter||50 mm (1.56 in)|
|Stator Thickness||35 mm (1.38 in)|
|No. of Stator Arms||12|
|Motor Wind||9 Turn Delta|
|Motor Wire||24-Strand 0.33 mm|
|Motor Kv||410KV RPM / Volt|
|No-Load Current (Io/10V)||1.53 Amps|
|Motor Resistance (Rm)||0.012 Ohms|
|Max Continuous Current||105 Amps|
|Max Continuous Power||5100 Watts|
|Weight||742 Grams (26.16 oz)|
|Outside Diameter||62.1 mm (2.44 in)|
|Shaft Diameter||5.98 mm (0.24 in)|
|Body Length||68.70 mm (2.70 in)|
|Overall Shaft Length||119.30 mm (4.70 in)|
|Max Lipo Cell||14s|
|Peak Current||145A (5 seconds)|
|Peal Power||7000 Watts (5 seconds)|
Det finns inga kundrecensioner just nu.