Filtrera här

Mikado

Information

Mikado (28)

per sida
Visar 1 - 24 av 28 artiklar
Visar 1 - 24 av 28 artiklar

Underkategorier

  • Logo 480 XXtreme

    The LOGO 700 and 800 XXtreme helicopters just had a little brother:  it is the LOGO 480 XXtreme helicopter.  This smaller 480 version has a rotor diameter of 1090 mm (EDGE blades 473).  It is operated with a 6S Lipo battery (max. 4000 mAh).  The very sturdy herringbone gear and the light-weight and reliable belt drive will suit novices as well as more ambitious 3D pilots. 

    LOGO 480 XXtreme electric model helicopter:

    • Rotor diameter: 1090 mm
    • Rotor blades: 473 mm
    • Tail rotor blades: 72 mm
    • Battery: 6S Lipo (> 4000 mAh)
    • Weight:  ab 2,2 kg
  • LOGO 550
  • LOGO 600
  • LOGO 700

    Genuine 700 sized heli, sturdy and durable down to the smallest detail All up weight of 5,300 g / 11.86 lb with 5,000 mAh batteries possible Freshly designed and aerodynamically improved new canopy design Lightweight, torsionally stiff 4-part chassis made of fiberreinforced molded plastic New lightweight and more delicate looking, yet strong rotor head Battery quick release system Agreeable sound due to newly designed and smaller herring bone main gear with optimized angles Fully encapsulated, lightweight and almost maintenance-free tail rotor case Choice of either 697 or 717 mm main rotor blades, 105 mm tail rotor blades included.

  • Logo 400 SE
     
    Thanks to the addition of a longer tail boom to the LOGO 400, the LOGO 400 SE can take 473 mm rotor blades. The light weight of this machine in combination with the larger rotor disk make for longer flight times and an outstanding flight performance .
     
     
    Features:
     
    plus
    flybarless rotorhead with metal yoke
    plus
    lightweight 8 mm head spindle 
    plus
    swashplaste driver with 8 ball bearings
    plus
    metal swashplate, aluminum motor plate
    plus
    hollow 10 mm main shaft
    plus
    carbon tail rod, carbon tail boom support
    plus
    thrustbearing set for tail rotor with steel hub
    plus
    GF airbrushed canopy 

    Specifications  :
    Rotor diamenter: 1090 mm
    Rotor blades: 473 mm
    Gear ratio main rotor: 1.7:7 -1:15.3
    Module 0.5
    Weight: 2000 g and up
    Battery: 5S-6S lipo cells

     

  • Logo 500

    Like the DX version, LOGO 500 3D will perform excellent with a 5S pack. If equipped with a 6S pack however, you will go to a completely new dimension of heli flying. The kit includes several extras for 3D flying, such as all levers fully ball-raced, aluminium swashplate, and light 3D paddles.

    We strive to give each of our helis its own individual look, while making sure they can be recognized as one of the same family. Mehran Tirooni, head of the design team at Mikado, has designed 4 individual canopies, one for each for the 4 new models in our new product line.

    Superlight, extremely rigid mainframe:

    The mainframe is made from glassfiber-reinforced polymer material and manufactured by injection moulding. An advantage of this type of mainframe is that it allows for much greater freedom in designing than is the case with a mainframes which are assembled by screwing flat carbon parts together. Consider the placement of the servos for example. We have integrated the three (standardsize) swashplate servos into the frame by providing slots for each one. In this way the servos are very easy to install and the linkages can be kept short and perfectly aligned. Also the entire mainframe is optimized for weight and extremely rigid at the same time.

     


    Herringbone main gear:

    Experience of previous years shows that conventional gear trains have reached their limit with regard to performance. The increasing power made available by latest Lipoly batteries calls for new concepts. We are proud to present this new gear technology, which includes herringbone gears. This type of gear has never before been used in a model helicopter.
    Its main advantages are:

    plus
    Considerably more transmission efficiency
    plus
    Very smooth running
    plus
    Extremely low noise level
    155 teeth (mod. 0.7)

     

    Features:
    plus
    Constant tail drive
    plus
    Fully ball-raced
    plus
    Hollow 10 mm main rotor shaft
    plus
    8 mm spindle shaft
    plus
    Carbon tail boom support
    plus
    Thrustbearing set for tail rotor with steel hub
    plus
    3D vertical and horizontal fins
    plus
    Alu swashplate
    plus
    Light 3D paddles
    plus
    Standard-size and midi-size servos can be used
    plus
    CG can be determined exactly by adjusting battery position

     

     

    Specifications:


    Rotor diameter: 1150 to 1190 mm
    Rotor blades: 500mm/520mm/550mm
    Gear ratio main rotor: 8.1 to 12.75; Mod. 0.7
    Weight: 2.6 kg and up
    Battery: 6S Lipo cells 4000 mAh

  • Logo 550 SX

    The LOGO 550 SX is the first member of the next evolutionary step of our popular and proven LOGO 500/550/600 helicopter series.
    Underneath the freshly designed canopy you find an improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis will of course be available as upgrade kits for all existing 500/550/600 size LOGO helicopters.

    - 550 mm main blades
    - 6 S Lipo mit 4500-5000 mAh, a luminum rotor head yoke with 8mm spindle shaft
    - light und durable chassis fiberglass reinforced frame with battery quick release system
    - direct servo link to the swashplate
    - Hollow main shaft with 10mm diameter
    - Herringbone main gear with 153 teeth (module 0.7)
    - Motor counterbearing with additional main shaft support
    - colored fin set in neon red, matched with the canopy
    - Extra-strong 22 mm diameter tail boom
    - Detailed airbrush canopy in neon red

  • Logo 550 SE

    LOGO 550 SE is the next step in the LOGO 500 Series. The  LOGO 550 SE keeps all the proven and popular components of the LOGO 500, while  incorporating several new developments to sustain today’s technical requirements during extreme flight manoeuvers.

    - 600mm main blades
    - 6 S Lipo mit 5000 mAh, - Alu-rotor head yoke with 8mm spindle shaft
    - light und durable chassis fiberglass reinforced frame - direct servo link to the swashplate
    - Hollow main shaft with 10mm diameter
    - Herringbone main gear with 153 teeth (module 07)
    - Motor counterbearing with additional main shaft support
    - colored fin set in neon-yellow, matched with the canopy
    - Extra-strong 22mm diameter tail boom
    - Detailed airbrush canopy in neon-yellow

  • Logo 600 SE

    - Very capital flightperformance for low RPM and 3D flying
    - 690 rotorblades
    - 10S Lipo (4000-5000mAh), 12S Lipo (max4000 mAh)
    - new one-piece metal rotorhead yoke with 8mm spindle shaft and extra-large thrust bearings
    - very light, but rigid air frame
    - hollow 10mm main shaft
    - new and stronger modul 1 herringbone main gear
    - new counter bearing with main shaft support
    - new fin set in neon-yellow color
    - 25mm tail boom
    - Airbrush canopy

  • Logo 600 SX

    LOGO 600 SX is the next logical step in the LOGO 600 series. LOGO 600 won the Xtreme Flight Championships in 2010 and 2011, and has also been on the podium in several other competitions, such as 3D Masters 2011.  Without doubt, it is one of the most successful models in its class. Underneath the freshly designed canopy you find the improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis is also available as an upgrade set for all existing 600 size LOGO helicopters.

    - 600-620 mm main blades
    - 10 S LiPo with 5,000 mAh, 12 S Lipo, max. 3,500 mAh
    - Alu-rotor head yoke with hollow 8mm spindle shaft and extra-large thrust bearings (Ø16mm)
    - light und durable chassis fiberglass reinforced frame with battery quick release system
    - Hollow main shaft with 10 mm diameter
    - Herringbone main gear with 106 teeth (module 1)
    - Motor counterbearing with additional main shaft support
    - Colored fin set in neon red, matched with the canopy
    - Extra-large 25 mm diameter tail boom
    - Detailed airbrush canopy

  • Logo 690 SX

    The new LOGO 690 SX from Mikado is a cross-over model, combining the best of 600 and 700 size helicopters. This makes for extraordinary flight performance.

    • LOGO 690 SX—a 700 size heli with a weight of just 4.8 kg (12S-5,000)
    • light und durable chassis fiberglass reinforced frame with battery quick release system
    • for 12S Lipo battery, 4,000 mAh to 5,000 mAh
    • aluminum swashplate with new geometry for quicker cyclic response
    • robust tail drive via HTD-belt with aluminum drive pulleys
    • stronger blade grips with Ø 5 mm blade grip bolt
    • stronger free wheel for higher torque
    • additional aluminum/carbon battery tray  
    • reinforced clamp ring for main rotor shaft
    • herringbone main gear makes for smooth sound
    • extra-stiff carbon tail boom brace
    • new airbrushed chassis cover lets you identify the flight attitude of the heli more easily
    • glass-fiber airbrushed canopy with new look

  • Logo 800 XXtreme

      

     

     

    With the introduction of the LOGO XXTREME Mikado rings in a new era for electric model helicopters. Pilots are bound to be fascinated by the sheer size of the machine and by its ultra-sharp design. Technical details:   

    • Extreme 3D helicopter for 700 - 800 mm rotor blades
    • Suitable for 14S lipo batteries
    • Very rigid and light carbon chassis
    • New mounting system for batteries for optimal determination of CG and quick change of batteries
    • New rotor head design with 12 mm hollow spindle and 23 mm thrust bearings
    • Hollow 14 mm main rotor shaft
    • Herringbone main gear, 175 teeth, module 1
    • Tail torque tube drive with large bevel gears
    • 6 mm tail shaft
    • 25 mm tail boom

      more Pictures